Maine Revised Statutes Title 38 Sec. 567-A – Certifications
Current as of: 2023 | Check for updates
|
Other versions
1. Cathodic protection tester. The commissioner may certify a person as a cathodic protection tester on finding that the person understands the principles and measurements of all common types of cathodic protection systems as applied to buried metal piping and tank systems. At a minimum, these persons must have education and experience in soil resistivity, stray current, structure-to-soil potential and component electrical isolation measurements of buried metal piping and tank systems.
[PL 1989, c. 865, §13 (NEW).]
Terms Used In Maine Revised Statutes Title 38 Sec. 567-A
- Cathodic protection tester: means an underground storage tank installer certified by the Maine Board of Underground Storage Tank Installers or a person certified by the commissioner pursuant to section 567?A. See Maine Revised Statutes Title 38 Sec. 562-A
- Corrosion expert: means a person who is certified by the commissioner pursuant to section 567?A, as qualified to engage in the practice of corrosion control on buried or submerged metal piping systems and metal tanks. See Maine Revised Statutes Title 38 Sec. 562-A
- Person: means any natural person, firm, association, partnership, corporation, trust, the State and any agency of the State, governmental entity, quasi-governmental entity, the United States and any agency of the United States and any other legal entity. See Maine Revised Statutes Title 38 Sec. 562-A
- tank: means any aboveground container, less than 10% of the capacity of which is beneath the surface of the ground, that is used or intended to be used for the storage or supply of oil. See Maine Revised Statutes Title 38 Sec. 562-A
2. Corrosion expert. The commissioner may certify a person as a corrosion expert on finding that the person has a thorough knowledge of the physical sciences and the principles of engineering and mathematics acquired by professional education and related practical experience and is qualified to engage in the practice of corrosion control on buried or submerged metal piping systems and metal tanks. That person must be accredited as being qualified by the National Association of Corrosion Engineers or be a professional engineer registered in this State who has certification or licensing that includes education and experience in corrosion control of buried or submerged metal piping systems and metal tanks.
[PL 1989, c. 865, §13 (NEW).]
SECTION HISTORY
PL 1989, c. 865, §13 (NEW).