Illinois Compiled Statutes 430 ILCS 60/3 – Labeling required
Current as of: 2024 | Check for updates
|
Other versions
(A) Each light of safety glazing material manufactured, distributed, imported or sold for use in hazardous locations or installed in such a location within the State of Illinois shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material on the safety glazing material or by other suitable means. The label shall indicate the labeler, whether manufacturer, fabricator or installer, the nominal thickness, the type of safety glazing material, the fact that the material meets the test requirements of ANSI Standard Z-97.1-1966 and such further requirements as may be adopted by the Department of Labor.
The label must be legible and visible after installation.
(B) Such safety glazing labeling shall not be used on other than safety glazing materials.
The label must be legible and visible after installation.
Terms Used In Illinois Compiled Statutes 430 ILCS 60/3
- State: when applied to different parts of the United States, may be construed to include the District of Columbia and the several territories, and the words "United States" may be construed to include the said district and territories. See Illinois Compiled Statutes 5 ILCS 70/1.14
(B) Such safety glazing labeling shall not be used on other than safety glazing materials.