[Effective Until 7/1/2024]

(a) The driver of a motorcycle, motorized bicycle, as defined in chapter 8 of this title, or motor-driven cycle, and any passenger on any of these, shall be required to wear either a crash helmet meeting federal standards contained in 49 C.F.R. § 571.218, or, if the driver or passenger is twenty-one (21) years of age or older, a helmet meeting the following requirements:

lawyer at desk

Ask a traffic law question, get an answer ASAP!
Thousands of highly rated, verified traffic lawyers.
Parking violations, accidents, DUI/DWI, licensing, registration, and more
Protect your vehicle and your rights with expert legal help now
Click here to chat with a lawyer about your rights.

Terms Used In Tennessee Code 55-9-302

  • Bicycle: means every device propelled by human power upon which any person may ride, having two (2) tandem wheels, either of which is more than twenty inches (20") in diameter. See Tennessee Code 55-8-101
  • Driver: means :
    (A) For purposes of a conventionally operated vehicle, every person who drives or is in actual physical control of a vehicle. See Tennessee Code 55-8-101
  • Motor-driven cycle: means every motorcycle, including every motor scooter, with a motor that produces no more than five (5) brake horsepower, or with a motor with a cylinder capacity not exceeding one hundred twenty-five cubic centimeters (125cc). See Tennessee Code 55-8-101
  • Person: means a natural person, firm, copartnership, association, corporation, or an engaged ADS. See Tennessee Code 55-8-101
  • Vehicle: means every device in, upon or by which any person or property is or may be transported or drawn upon a highway, excepting devices used exclusively upon stationary rails or tracks. See Tennessee Code 55-8-101
(1) Except as provided in subdivisions (a)(2)-(4), the helmet shall meet federal motor vehicle safety standards specified in 49 C.F.R. § 571.218;
(2) Notwithstanding any provision in 49 C.F.R. § 571.218 relative to helmet penetration standards, ventilation airways may penetrate through the entire shell of the helmet; provided, that no ventilation airway shall exceed one and one-half inches (11/2″) in diameter;
(3) Notwithstanding any provision in 49 C.F.R. § 571.218, the protective surface shall not be required to be a continuous contour; and
(4) Notwithstanding any provision in 49 C.F.R. § 571.218 to the contrary, a label on the helmet shall be affixed signifying that the helmet complies with the requirements of the American Society for Testing Materials (ASTM), the Consumer Product Safety Commission (CPSC), the Southern Impact Research Center (SIRC), or the Snell Foundation.
(b) This section does not apply to persons riding:

(1) Within an enclosed cab;
(2) Autocycles, as defined in § 55-1-103, that are fully enclosed;
(3) Golf carts;
(4) In a parade, at a speed not to exceed thirty (30) miles per hour, if the person is eighteen (18) years of age or older; or
(5) In a funeral procession, memorial ride under a police escort, or body escort detail; provided, that:

(A) The driver travels at a speed not to exceed thirty (30) miles per hour;
(B) The driver or passenger is twenty-one (21) years of age or older; and
(C) The funeral procession, memorial ride, or body escort detail does not exceed a distance of fifty (50) miles.
  Previous section
Next section  
 Part 3 Contents