Utah Code 15A-1-306.1. Division of Facilities Construction and Management duties for modular building units
Current as of: 2024 | Check for updates
|
Other versions
The Division of Facilities Construction and Management:
(1) shall maintain current information on the HUD Code and the portions of the State Construction Code relevant to modular building unit installation and provide at reasonable cost the information to compliance agencies or local regulators requesting the information;
Terms Used In Utah Code 15A-1-306.1
- Building: means a structure used or intended for supporting or sheltering any use or occupancy and any improvements attached to it. See Utah Code 15A-1-202
- Code: means :(5)(a) the State Construction Code; or(5)(b) an approved code. See Utah Code 15A-1-202
- Division: means the Division of Professional Licensing created in Section 58-1-103, except as provided in:
(2)(a) Part 4, State Fire Code Administration Act; and(2)(b) Chapter 5, State Fire Code Act. See Utah Code 15A-1-102- HUD Code: means the National Manufactured Housing Construction and Safety Standards Act, Utah Code 15A-1-302
- Local regulator: means the same as that term is defined in Section
15A-1-202 . See Utah Code 15A-1-302- modular building unit: means a structure:
(12)(a) constructed from one or more modules or panelized systems that is manufactured in accordance with the State Construction Code and transported to a location;(12)(b) the purpose of which is for human habitation, occupancy, or use; and(12)(c) is not a factory-built house, manufactured home, or mobile home. See Utah Code 15A-1-302- Modular manufacturer: means the entity responsible for manufacturing a panelized system or module. See Utah Code 15A-1-302
- Process: means a writ or summons issued in the course of a judicial proceeding. See Utah Code 68-3-12.5
- State: when applied to the different parts of the United States, includes a state, district, or territory of the United States. See Utah Code 68-3-12.5
- State Construction Code: means the State Construction Code adopted by:
(3)(b) Chapter 2a, Tall Wood Buildings of Mass Timber Construction Incorporated as Part of State Construction Code;(3)(e) Chapter 6, Additional Construction Requirements. See Utah Code 15A-1-102- Third party inspection agency: means an entity approved by the Division of Facilities Construction and Management to be qualified to inspect a module or panelized system for compliance with the construction documents, compliance control, and applicable code. See Utah Code 15A-1-302
(2) shall provide qualified personnel to advise compliance agencies and local regulators regarding the standards for:(2)(a) construction and installation of modular building units;(2)(b) construction and setup inspection of modular building units; and(2)(c) additions or modifications to modular building units;(3) may inspect modular building units during the construction or manufacturing process to determine compliance of a modular manufacturer with this title for modular building units to be installed within the state;(4) upon a finding of substantive deficiency at a modular manufacturer, through inspection or based on a report from an approved third party inspection agency, may:(4)(a) suspend the manufacturer’s construction of modular units to be sold or installed in the state;(4)(b) issue a corrective order to the manufacturer; or(4)(c) require an increase in third party inspections until the Division of Facilities Construction and Management is satisfied that the deficiency is resolved;(5) shall, if an action is taken pursuant to Subsection (4), provide notice of its action and a copy of the corrective order to the local regulator in the political subdivision where a modular unit is to be installed;(6) shall have rights of entry and inspection as specified under the HUD Code and Modular Building Institute Standard 1200 and Standard 1205, as applicable;(7) shall make rules, in accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, to implement this section and Section15A-1-307 , including a continuing education requirement for modular building unit construction and installation contractors; and(8) shall have the authority to set and collect fees associated with the provision of decals to support the administration of the modular building unit program. - Division: means the Division of Professional Licensing created in Section 58-1-103, except as provided in: