40 CFR 1027.105 – How much are the fees?
(a) Fees are determined based on the date we receive a complete application for certification. Each reference to a year in this subpart refers to the calendar year, unless otherwise specified. Paragraph (b) of this section specifies baseline fees that apply for certificates received in 2020. See paragraph (c) of this section for provisions describing how we calculate fees for 2021 and later years.
Terms Used In 40 CFR 1027.105
- Baseline: Projection of the receipts, outlays, and other budget amounts that would ensue in the future without any change in existing policy. Baseline projections are used to gauge the extent to which proposed legislation, if enacted into law, would alter current spending and revenue levels.
(b) The following baseline fees apply for each application for certification:
(1) Except as specified in paragraph (b)(2) of this section for Independent Commercial Importers, the following fees apply in 2020 for motor vehicles and motor vehicle engines:
Category | Certificate type | Fee |
---|---|---|
(i) Light-duty vehicles, light-duty trucks, medium-duty passenger vehicle, and complete heavy-duty highway vehicles | Federal | $27,347 |
(ii) Light-duty vehicles, light-duty trucks, medium-duty passenger vehicle, and complete heavy-duty highway vehicles | California-only | 14,700 |
(iii) Heavy-duty highway engine | Federal | 56,299 |
(iv) Heavy-duty highway engine | California-only | 563 |
(v) Heavy-duty vehicle | Evap | 563 |
(vi) Highway motorcycle, including Independent Commercial Importers | All | 1,852 |
1 The specified categories include engines and vehicles that use all applicable fuels.
(2) A fee of $87,860 applies in 2020 for Independent Commercial Importers with respect to the following motor vehicles:
(i) Light-duty vehicles and light-duty trucks.
(ii) Medium-duty passenger vehicles.
(iii) Complete heavy-duty highway vehicles.
(3) The following fees apply in 2020 for nonroad and stationary engines, vehicles, equipment, and components:
Category | Certificate type | Fee |
---|---|---|
(i) Locomotives and locomotive engines | All | $563 |
(ii) Marine compression-ignition engines and stationary compression-ignition engines with per-cylinder displacement at or above 10 liters | All, including EIAPP | 563 |
(iii) Other nonroad compression-ignition engines and stationary compression-ignition engines with per-cylinder displacement below 10 liters | All | 2,940 |
(iv) Large SI engines and stationary spark-ignition engines above 19 kW | All | 563 |
(v) Marine SI engines. Small SI engines, and stationary spark-ignition engines at or below 19 kW | Exhaust only | 563 |
(vi) Recreational vehicles | Exhaust (or combined exhaust and evap) | 563 |
(vii) Equipment and fuel-system components associated with nonroad and stationary spark-ignition engines, including portable fuel containers. | Evap (where separate certification is required) | 397 |
(c) We will calculate adjusted fees for 2021 and later years based on changes in the Consumer Price Index and the number of certificates. We will announce adjusted fees for a given year by March 31 of the preceding year.
(1) We will adjust the values specified in paragraph (b) of this section for years after 2020 as follows:
(i) Use the following equation for certification related to evaporative emissions from nonroad and stationary engines when a separate fee applies for certification to evaporative emission standards:
(ii) Use the following equation for all other certificates:
(2) The fee for any year will remain at the previous year’s amount until the value calculated in paragraph (c)(1) of this section differs by at least $50 from the amount specified for the previous year.
(d) Except as specified in § 1027.110(a) for motor vehicles and motor vehicle engines, we will use the following values to determine adjusted fees using the equation in paragraph (c) of this section:
(1) The following values apply for operating costs and labor costs:
Engine or vehicle category | Op | L |
---|---|---|
(i) Light-duty, medium-duty passenger, and complete heavy-duty highway vehicle certification | $3,322,039 | $2,548,110 |
(ii) Light-duty, medium-duty passenger, and complete heavy-duty highway vehicle in-use testing | 2,858,223 | 2,184,331 |
(iii) Independent Commercial Importers identified in paragraph (b)(2) of this section | 344,824 | 264,980 |
(iv) Highway motorcycles | 225,726 | 172,829 |
(v) Heavy-duty highway engines | 1,106,224 | 1,625,680 |
(vi) Nonroad compression-ignition engines that are not locomotive or marine engines, and stationary compression-ignition engines with per-cylinder displacement below 10 liters | 486,401 | 545,160 |
(vii) Evaporative certificates related to nonroad and stationary engines | 5,039 | 236,670 |
(viii) All other | 177,425 | 548,081 |
(2) The applicable Consumer Price Index is based on the values published by the Bureau of Labor Statistics for All Urban Consumers at https://www.usinflationcalculator.com/under “Inflation and Prices” and “Consumer Price Index Data from 1913 to. . . .”. For example, we calculated the 2006 fees using the Consumer Price Index for November 2004, which is 191.0.
(3) Fee categories for counting the number of certificates issued are based on the grouping shown in paragraph (d)(1) of this section.