46 USC 4503 – Fishing, fish tender, and fish processing vessel certification
(a) A vessel to which this subsection applies may not be operated unless the vessel—
(1) meets all survey and classification requirements prescribed by the American Bureau of Shipping or another similarly qualified organization approved by the Secretary; and
(2) has on board a certificate issued by the American Bureau of Shipping or that other organization evidencing compliance with this subsection.
Terms Used In 46 USC 4503
- individual: shall include every infant member of the species homo sapiens who is born alive at any stage of development. See 1 USC 8
- State: means a State, the District of Columbia, the Commonwealth of Puerto Rico, or any other territory or possession of the United States. See 1 USC 7
- vessel: includes every description of watercraft or other artificial contrivance used, or capable of being used, as a means of transportation on water. See 1 USC 3
(b) Subsection (a) applies to a fish processing vessel to which this chapter applies that—
(1) is built after July 27, 1990; or
(2) undergoes a major conversion completed after that date.
(c)(1) Except as provided in paragraph (2), subsection (a) applies to a vessel to which section 4502(b) of this title applies that is at least 50 feet overall in length and is built after July 1, 2013.
(2) Subsection (a) does not apply to a fishing vessel or fish tender vessel to which section 4502(b) of this title applies, if the vessel—
(A) is at least 50 feet overall in length, and not more than 180 feet overall in length as listed on the vessel’s certificate of documentation or certificate of number; and
(B)(i) is built after the date of the enactment of the Coast Guard Authorization Act of 2016; and
(ii) complies with—
(I) the requirements described in subsection (d); or
(II) the alternative requirements established by the Secretary under subsection (e).
(d) The requirements referred to in subsection (c)(2)(B)(ii)(I) are the following:
(1) The vessel is designed by an individual licensed by a State as a naval architect or marine engineer, and the design incorporates standards equivalent to those prescribed by a classification society to which the Secretary has delegated authority under section 3316 or another qualified organization approved by the Secretary for purposes of this paragraph.
(2) Construction of the vessel is overseen and certified as being in accordance with its design by a marine surveyor of an organization accepted by the Secretary.
(3) The vessel—
(A) completes a stability test performed by a qualified individual;
(B) has written stability and loading instructions from a qualified individual that are provided to the owner or operator; and
(C) has an assigned loading mark.
(4) The vessel is not substantially altered without the review and approval of an individual licensed by a State as a naval architect or marine engineer before the beginning of such substantial alteration.
(5) The vessel undergoes a condition survey at least twice in 5 years, not to exceed 3 years between surveys, to the satisfaction of a marine surveyor of an organization accepted by the Secretary.
(6) The vessel undergoes an out-of-water survey at least once every 5 years to the satisfaction of a certified marine surveyor of an organization accepted by the Secretary.
(7) Once every 5 years and at the time of a substantial alteration to such vessel, compliance of the vessel with the requirements of paragraph (3) is reviewed and updated as necessary.
(8) For the life of the vessel, the owner of the vessel maintains records to demonstrate compliance with this subsection and makes such records readily available for inspection by an official authorized to enforce this chapter.
(e)(1) Not later than 10 years after the date of the enactment of the Coast Guard Authorization Act of 2016, the Secretary shall submit to the Committee on Transportation and Infrastructure of the House of Representatives and the Committee on Commerce, Science, and Transportation of the Senate a report that provides an analysis of the adequacy of the requirements under subsection (d) in maintaining the safety of the fishing vessels and fish tender vessels which are described in subsection (c)(2) and which comply with the requirements of subsection (d).
(2) If the report required under this subsection includes a determination that the safety requirements under subsection (d) are not adequate or that additional safety measures are necessary, then the Secretary may establish an alternative safety compliance program for fishing vessels or fish tender vessels (or both) which are described in subsection (c)(2) and which comply with the requirements of subsection (d).
(3) The alternative safety compliance program established under this subsection shall include requirements for—
(A) vessel construction;
(B) a vessel stability test;
(C) vessel stability and loading instructions;
(D) an assigned vessel loading mark;
(E) a vessel condition survey at least twice in 5 years, not to exceed 3 years between surveys;
(F) an out-of-water vessel survey at least once every 5 years;
(G) maintenance of records to demonstrate compliance with the program, and the availability of such records for inspection; and
(H) such other aspects of vessel safety as the Secretary considers appropriate.
(f)(1) For purposes of this section and section 4503a, the term “built” means, with respect to a vessel, that the vessel’s construction has reached any of the following stages:
(A) The vessel’s keel is laid.
(B) Construction identifiable with the vessel has begun and assembly of that vessel has commenced comprising of at least 50 metric tons or one percent of the estimated mass of all structural material, whichever is less.
(2) In the case of a vessel greater than 79 feet overall in length, for purposes of paragraph (1)(A) a keel is deemed to be laid when a marine surveyor affirms that a structure adequate for serving as a keel for such vessel is in place and identified for use in the construction of such vessel.