Iowa Code 105.12 – Form of license
Current as of: 2024 | Check for updates
|
Other versions
1. A contracting, plumbing, mechanical, HVAC-refrigeration, sheet metal, or hydronic license shall be in the form of a certificate under the seal of the department, signed by the director of the department, and shall be issued in the name of the board. The license number shall be noted on the face of the license.
Terms Used In Iowa Code 105.12
- Board: means the plumbing and mechanical systems board as established pursuant to section 105. See Iowa Code 105.2
- Department: means the department of inspections, appeals, and licensing. See Iowa Code 105.2
- Hydronic: includes all low-pressure and high-pressure systems and all natural, propane, liquid propane, or other gas lines associated with any component of a hydronic system. See Iowa Code 105.2
- Plumbing: includes potable water piping, potable water treating or using equipment, medical gas piping systems, fuel gas piping, water heaters and vents, including all natural, propane, liquid propane, or other gas lines associated with any component of a plumbing system. See Iowa Code 105.2
- seal: shall include an impression upon the paper alone, or upon wax, a wafer affixed to the paper, or an official stamp of a notarial officer as provided in chapter 9B. See Iowa Code 4.1
- Sheet metal: means heating, ventilation, air conditioning, pollution control, fume hood systems and related ducted systems or installation of equipment associated with any component of a sheet metal system. See Iowa Code 105.2
2. In addition to the certificate, the board shall provide each licensee with a wallet-sized licensing identification card.