Iowa Code 459A.206 – Settled open feedlot effluent basins and unformed animal truck wash effluent structures — soils and hydrogeologic report
Current as of: 2024 | Check for updates
|
Other versions
1. A settled open feedlot effluent basin or an unformed animal truck wash effluent structure required to be constructed pursuant to a construction permit issued pursuant to section 459A.205 shall meet design standards as required by a soils and hydrogeologic report.
Terms Used In Iowa Code 459A.206
- Animal: means the same as defined in section 459. See Iowa Code 459A.102
- Animal truck wash effluent: means a combination of manure, washwater-induced runoff, or other runoff derived from an animal truck wash facility, which may include solids. See Iowa Code 459A.102
- ASTM international: means the American society for testing and materials international. See Iowa Code 459A.102
- basin: means an impoundment which is part of an open feedlot operation, if the primary function of the impoundment is to collect and store settled open feedlot effluent. See Iowa Code 459A.102
- Effluent: means open feedlot effluent or animal truck wash effluent. See Iowa Code 459A.102
- following: when used by way of reference to a chapter or other part of a statute mean the next preceding or next following chapter or other part. See Iowa Code 4.1
- Open feedlot: means a lot, yard, corral, building, or other area used to house animals in conjunction with an open feedlot operation. See Iowa Code 459A.102
- operation: means an unroofed or partially roofed animal feeding operation if crop, vegetation, or forage growth or residue cover is not maintained as part of the animal feeding operation during the period that animals are confined in the animal feeding operation. See Iowa Code 459A.102
- Person: means an individual, partnership, firm, corporation, or association. See Iowa Code 462A.2
- Structure: means any of the following:a. See Iowa Code 459A.1022. The report shall be submitted with the construction permit application as provided in section 459A.205. The report shall include all of the following:a. A description of the steps to determine the soils and hydrogeologic conditions at the proposed construction site, a description of the geologic units encountered, and a description of the effects of the soil and groundwater elevation and direction of flow on the construction and operation of the basin.b. The subsurface soil classification of the site. A subsurface soil classification shall be based on ASTM international designation D-2487-92 or D-2488-90.c. The results of at least three soil corings reflecting the continuous soil profile taken for each settled open feed lot effluent basin or unformed animal truck wash effluent structure. The soil corings shall be taken and used in determining subsurface soil characteristics and groundwater elevation and direction of flow of the proposed site for construction. The soil corings shall be taken as follows:(1) By a qualified person ordinarily engaged in the practice of taking soil cores and in performing soil testing.(2) At locations that reflect the continuous soil profile conditions existing within the area of the proposed basin or unformed structure, including conditions found near the corners and the deepest point of the proposed basin or unformed structure. The soil corings shall be taken to a minimum depth of ten feet below the bottom elevation of the basin or unformed structure.(3) By a method such as hollow stem auger or other method that identifies the continuous soil profile and does not result in the mixing of soil layers.