Kentucky Statutes 353.6603 – Completion of chemical disclosure registry form
Current as of: 2024 | Check for updates
|
Other versions
(1) A vendor or service provider performing any part of a high-volume horizontal fracturing treatment shall furnish the operator with the information required by subsection (2) of this section, as applicable, and with any information as needed for the operators to comply with this section. The information shall be provided as soon as possible and in no case later than forty-five (45) days after the completion of a high-volume horizontal fracturing treatment.
(2) Within ninety (90) days of concluding a high-volume horizontal fracturing treatment, the operator of the horizontal well shall complete the chemical disclosure registry form and post the form on the chemical disclosure registry. The following information shall be required to be furnished:
(a) Operator’s name;
(b) The date of the high-volume horizontal fracturing treatment; (c) The county in which the well is located;
(d) The API number for the well; (e) The well name and number;
(f) The longitude and latitude of the wellhead; (g) The true vertical depth of the well;
(h) The total water volume used;
(i) Each chemical additive used in the fracturing treatment, including the chemical abstract service number added, if applicable;
(j) The maximum concentration, in percent by mass, of each chemical intentionally added to the base fluid, if applicable; and
(k) The total amount of proppant used, if applicable.
(3) A vendor, service provider, or operator shall not be required to:
(a) Disclose any trade secrets under subsection (2)(j) of this section to the chemical disclosure registry;
(b) Disclose chemicals that are not disclosed to it by a third-party manufacturer of the chemicals; or
(c) Disclose chemicals that:
1. Occur incidentally or are otherwise unintentionally present in trace amounts;
2. May be the incidental result of a chemical reaction or chemical process;
or
3. May be constituents of naturally occurring materials that become part of a high-volume horizontal fracturing treatment, where the chemicals are unknown to the vendor, service provider, or operator.
Effective: June 24, 2015
History: Created 2015 Ky. Acts ch. 21, sec. 7, effective June 24, 2015.
(2) Within ninety (90) days of concluding a high-volume horizontal fracturing treatment, the operator of the horizontal well shall complete the chemical disclosure registry form and post the form on the chemical disclosure registry. The following information shall be required to be furnished:
Terms Used In Kentucky Statutes 353.6603
- Treatment: when used in a criminal justice context, means targeted interventions
that focus on criminal risk factors in order to reduce the likelihood of criminal behavior. See Kentucky Statutes 446.010 - True vertical: means the orientation of the well at ninety degrees (90°. See Kentucky Statutes 353.010
- Well: means a borehole drilled or proposed to be drilled for the purpose of producing natural gas or petroleum, or one through which natural gas or petroleum is being produced. See Kentucky Statutes 353.010
(a) Operator’s name;
(b) The date of the high-volume horizontal fracturing treatment; (c) The county in which the well is located;
(d) The API number for the well; (e) The well name and number;
(f) The longitude and latitude of the wellhead; (g) The true vertical depth of the well;
(h) The total water volume used;
(i) Each chemical additive used in the fracturing treatment, including the chemical abstract service number added, if applicable;
(j) The maximum concentration, in percent by mass, of each chemical intentionally added to the base fluid, if applicable; and
(k) The total amount of proppant used, if applicable.
(3) A vendor, service provider, or operator shall not be required to:
(a) Disclose any trade secrets under subsection (2)(j) of this section to the chemical disclosure registry;
(b) Disclose chemicals that are not disclosed to it by a third-party manufacturer of the chemicals; or
(c) Disclose chemicals that:
1. Occur incidentally or are otherwise unintentionally present in trace amounts;
2. May be the incidental result of a chemical reaction or chemical process;
or
3. May be constituents of naturally occurring materials that become part of a high-volume horizontal fracturing treatment, where the chemicals are unknown to the vendor, service provider, or operator.
Effective: June 24, 2015
History: Created 2015 Ky. Acts ch. 21, sec. 7, effective June 24, 2015.