New Hampshire Revised Statutes 266:49 – Visual Requirements
Current as of: 2023 | Check for updates
|
Other versions
No tire shall be deemed to be in safe driving condition if such tire has:
I. A fabric break, or a cut in excess of one inch in any direction as measured on the outside of the tire and deep enough to reach the body cords, or has been repaired temporarily by the use of blowout patches or boots; or
II. Any bump, bulge or knot related to separation or partial failure of the tire structure; or
III. Any portion of the ply or cord structure exposed; or
IV. A portion of the tread design completely worn, provided such worn portion is of sufficient size to affect the traction and stopping ability of the tire.
I. A fabric break, or a cut in excess of one inch in any direction as measured on the outside of the tire and deep enough to reach the body cords, or has been repaired temporarily by the use of blowout patches or boots; or
II. Any bump, bulge or knot related to separation or partial failure of the tire structure; or
III. Any portion of the ply or cord structure exposed; or
IV. A portion of the tread design completely worn, provided such worn portion is of sufficient size to affect the traction and stopping ability of the tire.