(a)

lawyer at desk

Ask a legal question, get an answer ASAP!
Click here to chat with a lawyer about your rights.

Terms Used In Tennessee Code 68-102-503

  • Cigarette: means any roll for smoking, whether made wholly or in part of tobacco or any other substance, regardless of size or shape, and whether or not the tobacco or substance is flavored, adulterated or mixed with any other ingredient, the wrapper or cover of which is made of paper or any other substance or material except tobacco. See Tennessee Code 68-102-502
  • Manufacturer: means :
    (A) Any entity that manufactures or otherwise produces cigarettes or causes cigarettes to be manufactured or produced anywhere that the manufacturer intends to be sold in this state, including cigarettes intended to be sold in the United States through an importer. See Tennessee Code 68-102-502
  • Quality control and quality assurance program: means the laboratory procedures implemented to ensure that operator bias, systematic and nonsystematic methodological errors, and equipment-related problems do not affect the results of the testing. See Tennessee Code 68-102-502
  • Repeatability: means the range of values within which the repeat results of cigarette test trials from a single laboratory will fall ninety-five percent (95%) of the time. See Tennessee Code 68-102-502
  • Reporter: Makes a record of court proceedings and prepares a transcript, and also publishes the court's opinions or decisions (in the courts of appeals).
  • Retail dealer: means any person, other than a manufacturer or wholesale dealer, engaged in selling cigarettes or tobacco products. See Tennessee Code 68-102-502
  • Sale: means , in addition to its usual meaning, any sale, use, transfer, exchange, barter, gift or offer for sale and distribution, in any manner or by any means whatsoever. See Tennessee Code 68-102-502
  • Trial: A hearing that takes place when the defendant pleads "not guilty" and witnesses are required to come to court to give evidence.
  • written: includes printing, typewriting, engraving, lithography, and any other mode of representing words and letters. See Tennessee Code 1-3-105
  • Year: means a calendar year, unless otherwise expressed. See Tennessee Code 1-3-105
(1) Except as provided in subsection (g), no cigarettes may be sold or offered for sale in this state or offered for sale or sold to persons located in this state unless the cigarettes have been tested in accordance with the test method and meet the performance standard specified in this section, a written certification has been filed by the manufacturer with the state fire marshal in accordance with § 68-102-504, and the cigarettes have been marked in accordance with § 68-102-505.
(2) Testing of cigarettes shall be conducted in accordance with the American Society of Testing and Materials (ASTM) standard E2187-04, Standard Test Method for Measuring the Ignition Strength of Cigarettes.
(3) Testing shall be conducted on ten (10) layers of filter paper.
(4) No more than twenty-five percent (25%) of the cigarettes tested in a test trial in accordance with this section shall exhibit full-length burns. Forty (40) replicate tests shall comprise a complete test trial for each cigarette tested.
(5) The performance standard required by this section shall only be applied to a complete test trial.
(6) Written certifications shall be based upon testing conducted by a laboratory that has been accredited pursuant to standard ISO/IEC 17025 of the International Organization for Standardization (ISO), or other comparable accreditation standard required by the state fire marshal.
(7) Laboratories conducting testing in accordance with this section shall implement a quality control and quality assurance program that includes a procedure that will determine the repeatability of the testing results. The repeatability value shall be no greater than nineteen-hundredths (0.19).
(8) This section does not require additional testing if cigarettes are tested consistent with this part for any other purpose.
(9) Testing performed or sponsored by the state fire marshal to determine a cigarette’s compliance with the performance standard required shall be conducted in accordance with this section.
(b) Each cigarette listed in a certification submitted pursuant to § 68-102-504 that uses lowered permeability bands in the cigarette paper to achieve compliance with the performance standard set forth in this section shall have at least two (2) nominally identical bands on the paper surrounding the tobacco column. At least one (1) complete band shall be located at least fifteen millimeters (15 mm) from the lighting end of the cigarette. For cigarettes on which the bands are positioned by design, there shall be at least two (2) bands fully located at least fifteen millimeters (15 mm) from the lighting end and ten millimeters (10 mm) from the filter end of the tobacco column, or ten millimeters (10 mm) from the labeled end of the tobacco column for non-filtered cigarettes.
(c) A manufacturer of a cigarette that the state fire marshal determines cannot be tested in accordance with the test method prescribed in subdivision (a)(2) shall propose a test method and performance standard for the cigarette to the state fire marshal. Upon approval of the proposed test method and a determination by the state fire marshal that the performance standard proposed by the manufacturer is equivalent to the performance standard prescribed in subdivision (a)(4), the manufacturer may employ the test method and performance standard to certify the cigarette pursuant to § 68-102-504. If the state fire marshal determines that another state has enacted reduced cigarette ignition propensity standards that include a test method and performance standard that are the same as those contained in this part, and the state fire marshal finds that the officials responsible for implementing those requirements have approved the proposed alternative test method and performance standard for a particular cigarette proposed by a manufacturer as meeting the fire safety standards of that state’s law or regulation under a legal provision comparable to this section, then the state fire marshal shall authorize that manufacturer to employ the alternative test method and performance standard to certify that cigarette for sale in this state, unless the state fire marshal demonstrates a reasonable basis why the alternative test should not be accepted under this part. All other applicable requirements of this section shall apply to the manufacturer.
(d) Each manufacturer shall maintain copies of the reports of all tests conducted on all cigarettes offered for sale for a period of three (3) years, and shall make copies of these reports available to the state fire marshal and the attorney general and reporter upon written request. Any manufacturer who fails to make copies of these reports available within sixty (60) days of receiving a written request shall be subject to a civil penalty not to exceed ten thousand dollars ($10,000) for each day after the sixtieth day that the manufacturer does not make the copies available.
(e) The state fire marshal may adopt a subsequent ASTM Standard Test Method for Measuring the Ignition Strength of Cigarettes upon a finding that the subsequent method does not result in a change in the percentage of full-length burns exhibited by any tested cigarette when compared to the percentage of full-length burns the same cigarette would exhibit when tested in accordance with ASTM Standard E2187-04 and the performance standard in subdivision (a)(4).
(f) The state fire marshal shall review the effectiveness of this section and report findings every three (3) years to the speakers of the senate and the house of representatives and, if appropriate, recommendations for legislation to improve the effectiveness of this part. The report and legislative recommendations shall be submitted no later than February 1 of each three-year period.
(g) The requirements of subsection (a) shall not prohibit:

(1) Wholesale or retail dealers from selling their existing inventory of cigarettes on or after January 1, 2010, if the wholesale or retail dealer can establish that state tax stamps were affixed to the cigarettes prior to January 1, 2010, and if the wholesale or retail dealer can establish that the inventory was purchased prior to January 1, 2010, in comparable quantity to the inventory purchased during the same period of the prior year; or
(2) The sale of cigarettes solely for the purpose of consumer testing. For purposes of this subdivision (g)(2), “consumer testing” means an assessment of cigarettes that is conducted by a manufacturer, or under the control and direction of a manufacturer, for the purpose of evaluating consumer acceptance of the cigarettes, utilizing only the quantity of cigarettes that is reasonably necessary for the assessment.
(h) This part shall be implemented in accordance with the implementation and substance of the New York Fire Safety Standards for Cigarettes.
  Previous section
Next section  
 Part 5 Contents