A. As used in this section:

Ask a accident law question, get an answer ASAP!
Thousands of highly rated, verified accident lawyers.
Click here to chat with a lawyer about your rights.

(1)     “camera monitor” means a device or instrument that records a visual image of a motor vehicle being operated in violation of a traffic signal’s red light directive to stop;

(2)     “controller assembly” means a complete electrical device mounted in a cabinet for controlling the operation of a traffic signal;

(3)     “rumble strips” means grooves in pavement or rows of raised pavement markers placed perpendicular to the direction of travel in a street or highway lane to alert inattentive drivers to a lane or traffic condition;

(4)     “traffic signal” means a power-operated traffic control device by which traffic is alternately directed to stop and permitted to proceed; and

(5)     “warning beacon” means a power-operated traffic control device with one or more signal sections that operates in a flashing mode.

B. When a county or municipality, including a home-rule municipality that has adopted a charter pursuant to Article 10, § 6 of the constitution of New Mexico, uses a camera monitor in conjunction with a traffic signal at an intersection or other location to detect violation of the traffic signal’s red light directive to stop, the county or municipality shall install, on streets or highways approaching the traffic signal from directions covered by the camera monitor, a warning sign or signs supplemented by a warning beacon or rumble strips.

C. The warning beacon described in Subsection B of this section shall be installed, together with the warning sign or signs, at a location and interconnected with the traffic signal controller assembly in a manner that will cause the beacon to flash yellow during the period when a person driving a motor vehicle passing the beacon at the legal speed for the street or highway will encounter a traffic signal red light, or a queue of motor vehicles resulting from the display of the red light, upon arrival at the signalized location.

D. If rumble strips described in Subsection B of this section are used, they shall be installed, together with warning signs, at a location in advance of a traffic signal so as to provide a driver, moving over the rumble strips at the legal speed for the street or highway, with warning that if the traffic signal is displaying a yellow signal, the driver will encounter a traffic signal red light, or a queue of motor vehicles resulting from the display of the red light, upon arrival at the signalized location.

E. Warning signs used with beacons or rumble strips shall warn a driver that the driver may encounter a traffic signal displaying a red light at an upcoming intersection and that the traffic signal is photo-enforced. When used with rumble strips, a warning sign shall be installed facing traffic approaching a signalized location on the near side of the street or highway and, if appropriate, a warning sign shall also be installed facing traffic approaching a signalized location on a median dividing opposite directions of traffic.

F. The warning sign and warning beacon described in Subsection B of this section shall comply with signs and beacons appropriate for the purposes of this section provided in the manual of uniform traffic control devices adopted by the state transportation commission pursuant to Section 66-7-101 N.M. Stat. Ann..