Utah Code 69-5-202. Location identification information shared with public safety answering point
Current as of: 2024 | Check for updates
|
Other versions
An owner or operator of a multi-line telephone system shall configure the multi-line telephone system in such a manner that, when an individual makes a 911 call using the multi-line telephone system, the multi-line telephone system automatically provides the public safety answering point that receives the call verified automated number information and automated location information that includes:
(1) the street address, and, if applicable, the business name, of the location of the communications device from which the call is made;
Terms Used In Utah Code 69-5-202
- Multi-line telephone system: means a network- or premises-based telephone system installed at an end-use location that uses common control units, common telephones, and common control hardware and software to provide a connection to the public switched network to multiple end-users at the end-use location. See Utah Code 69-5-102
(2) the direct call-back telephone number for the location from which the call is made;
(3) any applicable office, unit, or building number of the location from which the call is made;
(4) the room number, or other equivalent designation, of the location from which the call is made; and
(5)
(5)(a) if the multi-line telephone system operates for a multi-story building, the building floor from which the call is made; and
(5)(b) if the multi-line telephone system operates for two or more buildings:
(5)(b)(i) the building number, or other equivalent designation, of the location from which the call is made; and
(5)(b)(ii) the building floor from which the call is made.