Virginia Code 58.1-1605: Alternative for rates
On or before November 1, in the last year of each biennium, the State Forester shall submit to the Governor a report of the total revenues collected from the forest products tax for the immediately preceding two years. If the General Assembly fails to appropriate for such next biennium from the general fund for the reforestation of timberland activity a sum which equals or exceeds such revenues, the tax hereby imposed shall, beginning on July 1 of such next biennium, be at the rates set forth below. Such rates shall remain in effect until an appropriation from the general fund for any biennium equals or exceeds the revenues actually collected from this tax for the immediately preceding biennium at the rates imposed by § 58.1-1604.
Terms Used In Virginia Code 58.1-1605
- Appropriation: The provision of funds, through an annual appropriations act or a permanent law, for federal agencies to make payments out of the Treasury for specified purposes. The formal federal spending process consists of two sequential steps: authorization
- Forest product: means wood, derived from trees severed in Virginia for commercial purposes, of any type or form, including but not limited to logs, timber, pulpwood, excelsior wood, chemical wood, woodchips, biomass chips, fuel chips, mulch, bolts, billets, crossties, switch ties, poles, piles, fuel wood, posts, all cooperage products, tanbark, mine ties, mine props, and all other types of forest products used in mines. See Virginia Code 58.1-1601
- State: when applied to a part of the United States, includes any of the 50 states, the District of Columbia, the Commonwealth of Puerto Rico, Guam, the Northern Mariana Islands, and the United States Virgin Islands. See Virginia Code 1-245
1. On pine lumber in its various sizes and forms, including railroad switch ties, bridge timber, and dimension stock the rate per 1000 board feet measure shall be 15 cents; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received.
2. On hardwood, cypress, and all other species of lumber the rate per 1000 board feet measure shall be 22 1/2 cents; or at the election of the taxpayer, 4 cents per ton of logs received.
3. On timber sold as logs and not converted into lumber or other products in this Commonwealth, the rate per 1000 log feet scale, International 1/4″ Kerf Rule, shall be 15 cents on pine and 22 1/2 cents on other species; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
4. On logs to be converted into veneer the rate per 1000 board feet log scale, International 1/4″ Kerf Rule, shall be 15 cents for pine, and 22 1/2 cents for other species; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
5. On pulpwood, excelsior wood, chemical wood, bolts or billets, fuel wood, tanbark, and other products customarily sold by the cord, the rate per standard cord of 128 cubic feet shall be 7 1/2 cents for pine and 11 1/4 cents per cord on all other species; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
6. On chips and mulch, including products such as biomass chips and fuel chips, the rate shall be $0.026 per ton for pine, $0.04 per ton for other species, and $0.03 per ton for loads consisting of both pine and other species.
7. On railroad crossties, the rate shall be one-half cent per piece on species of pine and one cent per piece on all other species; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
8. On posts, mine ties, mine props, round mine collars, and other types of timber used in connection with mining and ordinarily sold by the piece, the rate per 100 pieces shall be as follows: 6 cents for pine and 9 cents for other species, where each piece is 4′ or less in length; 9 3/4 cents for pine and 14 1/4 cents for other species, where each piece is more than 4′ in length but not over 8′ in length; and 12 cents for pine and 18 cents for other species, where each piece is more than 8′ in length. If the taxpayer so elects, he may pay the taxes due on the above-mentioned forest products at the rate of 16 1/2 cents per 1000 lineal feet for pine and 24 3/4 cents for other species; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
9. On piling and poles of all types the rate shall equal two-sevenths of one percent of invoice value f.o.b. loading out point; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
10. On keg staves the rate per standard 400-inch bundle shall be 1 1/2 cents; the rate per 100 keg heads shall be 4 1/2 cents; and on tight cooperage, 4 1/2 cents per 100 staves and 9 cents per 100 heads; or at the election of the taxpayer, 2 6/10 cents per ton of pine logs received; and 4 cents per ton of logs of other species received.
11. On any other type of forest product not herein enumerated, severed or separated from the soil the Commissioner shall determine a fair unit tax rate, based on the cubic foot wood volume relationship between the product and the cubic foot volume of 1000 board feet measure of pine lumber when the product is pine or on the unit rate of hardwood lumber when the product is a species other than pine.
Code 1950, § 58-838.5:2; 1971, Ex. Sess., c. 179; 1978, c. 72; 1981, c. 372; 1984, cc. 675, 715; 1998, c. 420; 2015, c. 170.