779.485

779.485 Special tools.

779.485(1)

(1) Definitions. In this section:

779.485(1)(a)

(a) “Customer” means a person who does any of the following:

779.485(1)(a)1.

1. Causes a special tool builder to design, develop, manufacture, assemble, or otherwise make a special tool.

779.485(1)(a)2.

2. Orders a product from a manufacturer that is produced with a special tool or causes a manufacturer to use a special tool.

779.485(1)(b)

(b) “Intellectual property” means a design, program, or process.

779.485(1)(c)

(c) “Manufacturer” means a person who uses a special tool as part of the person’s manufacturing process.

779.485(1)(d)

(d) “Manufacturer’s lien” means a lien described in sub. (b).

779.485(1)(e)

(e) “Special tool” means a tool, die, jig, gauge, gauging fixture, metal casting, pattern, forging, machinery, ferrous or nonferrous machined part, or intellectual property used for the purpose of designing, developing, manufacturing, assembling, or fabricating a metal part.

779.485(1)(f)

(f) “Special tool builder” means a person who designs, develops, manufactures, fabricates, or assembles a special tool.

779.485(1)(g)

(g) “Special tool builder’s lien” means a lien described in sub. (2) (a) 1.

779.485(2)

(2) Special tool builders.

779.485(2)(a)

(a) Lien.

779.485(3)(d)1.b.

b. A description of the special tool.

779.485(3)(d)1.c.

c. The time and place of the public auction.

779.485(3)(d)1.d.

d. An itemized statement of the amount for which the manufacturer’s lien is claimed.

779.485(2)(a)1.

1. A special tool builder who does all of the following has a lien on a special tool in the amount that a customer or manufacturer owes the special tool builder for designing, developing, manufacturing, fabricating, assembling, repairing, or modifying the special tool:

779.485(2)(a)1.a.

a. Permanently records on the special tool the special tool builder’s name, street address, city, and state, or other traceable identification.

779.485(2)(a)1.b.

b. Files a financing statement for the special tool under subch. V of ch. 409.

779.485(2)(a)2.

2. A special tool builder’s lien attaches and is perfected on the date that both of the requirements specified in subd. 1. a. and b. are satisfied.

779.485(2)(a)3.

3. A special tool builder retains a special tool builder’s lien even if the special tool builder does not have physical possession of the special tool for which the lien is claimed.

779.485(2)(a)4.

4. A special tool builder’s lien remains valid until the first of any of the following occurs:

779.485(2)(a)4.a.

a. The customer or manufacturer pays the special tool builder the amount for which the special tool builder’s lien is claimed.

779.485(2)(a)4.b.

b. The financing statement is terminated.

779.485(2)(b)

(b) Priority. An attached and perfected special tool builder’s lien has priority over any other lien that subsequently attaches to the special tool.

779.485(2)(c)

(c) Enforcement.

779.485(3)

(3) Manufacturers.

779.485(3)(a)

(a) Transfer of interest.

779.485(3)(a)1.

1. Unless otherwise agreed by a customer and manufacturer in writing, all rights, title, and interest of a customer in a special tool that a manufacturer has used to produce parts ordered by the customer or that the customer has caused a manufacturer to use are transferred to the manufacturer for the purpose of destroying the special tool, if all of the following are satisfied:

779.485(3)(a)1.a.

a. The special tool has been in the possession of the manufacturer during the one-year period beginning after the manufacturer’s last use of the special tool.

779.485(3)(a)1.b.

b. The customer has not claimed possession of the special tool before the expiration of the one-year period specified in subd. 1. a.

779.485(3)(c)

(c) Enforcement.

779.485(3)(d)

(d) Public auction.

779.485(3)(d)1.a.

a. A statement that the manufacturer intends to sell the special tool no sooner than 60 days after receipt of the notice.

779.485(2)(c)1.

1. A special tool builder may not enforce a special tool builder’s lien unless the builder provides notice in writing to the customer, manufacturer, or both that owes the builder the amount for which the special tool builder’s lien is claimed. The notice shall be delivered personally or by registered mail, return receipt requested, to the last-known address of the customer, manufacturer, or both and shall state that the builder is claiming a lien for the amount that customer, manufacturer, or both owes the special tool builder for designing, developing, manufacturing, fabricating, assembling, repairing, or modifying the special tool and that the builder demands payment for the amount. Except as provided in subd. 2., if the special tool builder is not paid the amount claimed within 90 days after either the customer or, if applicable, the manufacturer receives the notice, whichever is later, the builder has the right to possession of the special tool and the builder may enforce the right by any available judicial procedure or by taking possession of the special tool without judicial process, but only if the taking is done without breach of the peace.

779.485(2)(c)2.

2. If the postal service returns any notice required under subd. 1. as undeliverable, the special tool builder may enforce the right to possession under subd. 1. no sooner than 90 days after the special tool builder publishes, under ch. 985, a class 1 notice of the intended enforcement of the right to possession in a newspaper of general circulation in the place where the special tool is last known to be located and in the place of the last-known address of any person for which the postal service returns a notice as undeliverable.

779.485(3)(a)1.c.

c. After the expiration of the one-year period specified in subd. 1. a., the manufacturer provides written notice by registered mail, return receipt requested, to an address designated in writing by the customer or, if the customer has made no such designation, to the customer’s last-known address, that indicates that the manufacturer intends to terminate the customer’s rights, title, and interest in the special tool and transfer those rights, title, and interest to the manufacturer as provided in this paragraph.

779.485(3)(a)1.d.

d. The customer has not, within 120 days after the date that the manufacturer receives the return receipt of notice specified in subd. 1. c. or within 120 days after the manufacturer provides notice if no return receipt is received within that period, claimed possession of the special tool or agreed to other arrangements with the manufacturer for storage of the special tool.

779.485(3)(a)2.

2. The one-year period specified in subd. 1. a. applies retroactively to special tools last used before April 29, 2006.

779.485(3)(a)3.

3. This paragraph does not apply to a special tool that is titled to, and in the possession of, a manufacturer. This paragraph may not be construed to grant a customer any right, title, or interest in a special tool.

779.485(3)(b)

(b) Lien. A manufacturer has a lien on any special tool in the manufacturers’ possession belonging to a customer for the amount due the manufacturer from the customer for work performed with the special tool or for making or improving the special tool. A manufacturer may retain possession of the special tool until the amount due is paid.

779.485(3)(c)1.

1. A manufacturer may not enforce a manufacturers’ lien unless the manufacturer provides notice in writing to the customer, delivered personally or by registered mail to the last-known address of the customer, that states that the manufacturer is claiming a lien for the amount due described in para. (b). Except as provided in subd. 2., if the manufacturer is not paid the amount due within 90 days after the customer receives the notice, and if the manufacturer is still in possession of the special tool, the manufacturer may sell the special tool at public auction under para. (d).

779.485(3)(c)2.

2. If the postal service returns a notice under subd. 1. as undeliverable and if the manufacturer is still in possession of the special tool, the manufacturer may sell the special tool at public auction under para. (d) no sooner than 90 days after the special tool builder publishes, under ch. 985, a class 1 notice of the sale in a newspaper of general circulation in the place of the last-known address of the customer.

779.485(3)(d)1.

1. A manufacturer may not sell a special tool at public auction unless the manufacturer has provided, by registered mail, return receipt requested, the customer and any other person, including a special tool builder, who has perfected by filing a security interest in the special tool, a notice that includes all of the following:

779.485(3)(d)1.e.

e. A statement that any product produced by the manufacturer with the special tool complies with the quality and quantity ordered by the customer.

779.485(3)(d)2.

2. Except as provided in subd. 3., a manufacturer may sell a special tool at public auction no sooner than 60 days after the customer’s or other person’s receipt of the notice specified in subd. 1., whichever is later, except that, if the postal service returns any of the notices as undeliverable, the manufacturer may sell the special tool no sooner than 60 days after the manufacturer publishes, under ch. 985, a class 1 notice of the intended sale, that includes the information specified in subd. 1., in a newspaper of general circulation in the place where the manufacturer is holding the special tool for sale, in the place of the customer’s last-known address, and in the place of the other person’s last-known address.

779.485(3)(d)3.

3. If a customer disagrees with the statement specified in subd. 1. e. that is included in a notice, the customer may notify the manufacturer of the disagreement in writing by registered mail, return receipt requested. If a manufacturer receives a notification under this subdivision before the date of the public auction, the manufacturer may not sell the special tool at public auction until after the disagreement is resolved.

779.485(3)(e)

(e) Proceeds. The proceeds of a sale of a special tool under para. (d) shall, if applicable, first be paid to a prior lienholder who has perfected a lien in an amount sufficient to extinguish that lien. Any excess proceeds shall next be paid to the manufacturer in an amount sufficient to extinguish the manufacturer’s lien. Any remainder shall be paid to the customer.